Your concrete stops absorbing every spill that hits it. Oil, antifreeze, road salt—it all wipes away instead of soaking in permanently.
The floor actually reflects light instead of swallowing it, making your garage brighter and more functional. You can hose it down, squeegee it dry, and move on with your day.
No more scrubbing stains that won’t budge. No more concrete that looks worse every month. Just a surface that handles whatever you throw at it and still looks professional years later.
We’ve been transforming Connecticut garages with professional coatings that actually hold up. We’re veteran-owned and understand what homeowners in Kensington need—solutions that work in real life, not just on paper.
Kensington homeowners know quality when they see it. With homes built primarily between 1940-1999 and an 83% homeownership rate, this community invests in improvements that last. That’s exactly what we deliver.
We use advanced polymer sealers and proven application methods that create lasting bonds with your concrete. No corners cut, no rushing the process—just professional results you can count on for years.
First, we properly prepare your concrete surface. This isn’t optional—it’s what separates coatings that last from ones that peel up in six months. We clean, repair cracks, and create the right surface profile for maximum adhesion.
Next, we apply our base coating system. We use advanced polymer technology that bonds chemically with your concrete, not just sits on top of it. Temperature and humidity matter, so we monitor conditions throughout the process.
Finally, we apply the topcoat that gives you the durability and appearance you’re after. Whether you want a high-gloss finish or something more subtle, we have options that match your preferences and usage requirements.
Ready to get started?
You get complete surface preparation, crack repair, and professional application of our polymer coating system. We handle the details that matter—proper curing time, environmental controls, and quality checks at each step.
Kensington’s climate means your garage floor faces temperature swings, road salt, and moisture challenges. Our coatings are formulated to handle Connecticut weather patterns and the specific demands of suburban garage use.
The finished surface resists chemicals, impacts, and abrasion while maintaining its appearance. You’ll have a floor that’s easier to clean, safer to walk on, and adds value to your property. Plus, our work comes with warranty protection so you know it’s built to last.
Most garage floor coating projects in Kensington take 1-2 days to complete, depending on your garage size and the specific coating system you choose. The actual application is just part of the timeline—proper surface preparation and curing are what determine the real schedule.
We don’t rush the process because that’s how coatings fail. Your concrete needs proper prep time, and the coating needs proper cure time. We’ll give you a realistic timeline upfront so you can plan accordingly.
Weather conditions affect timing too. Connecticut’s humidity and temperature swings mean we sometimes need to adjust our schedule to ensure optimal results. It’s better to wait for the right conditions than to compromise the final product.
Polyaspartic coatings cure much faster than traditional epoxy—often within 24 hours versus 3-4 days for epoxy systems. This means less disruption to your routine and faster return to normal garage use.
Polyaspartic also handles temperature extremes better, which matters in Connecticut where your garage might see everything from below freezing to over 90 degrees. It’s also more UV stable, so it won’t yellow or fade if your garage gets sunlight.
The trade-off is usually cost—polyaspartic systems typically cost more upfront than basic epoxy. But when you factor in durability, cure time, and long-term performance, many Kensington homeowners find it’s worth the investment.
Most existing concrete can be successfully coated, but the condition of your slab determines what preparation work is needed first. Cracks, oil stains, and surface defects don’t automatically disqualify your floor—they just need to be addressed properly.
We start with a thorough assessment of your concrete’s condition. Minor cracks get repaired, oil stains get treated, and the surface gets profiled to ensure proper adhesion. The goal is creating the right foundation for a long-lasting coating.
Age isn’t necessarily a problem—many of Kensington’s homes were built in the 1960s-80s, and those concrete slabs can take coatings very well with proper preparation. The key is honest evaluation and doing the prep work right the first time.
Maintenance is straightforward—regular sweeping and occasional mopping with mild detergent keeps most coated floors looking good. The coating prevents stains from penetrating, so spills wipe up easily instead of soaking in permanently.
For tougher situations, you can use a hose and squeegee to clean the entire floor quickly. The coating is designed to handle water and cleaning products without damage. Avoid harsh abrasives or strong acids, but normal garage chemicals won’t hurt it.
The biggest maintenance factor is actually prevention—using door mats to reduce tracked-in debris and cleaning up spills promptly. But even if you’re not perfect about it, a quality coating system will handle normal garage use without requiring special care.
Garage floor coating costs vary based on your garage size, the condition of your existing concrete, and which coating system you choose. Most Kensington homeowners invest between $3-8 per square foot for professional installation, depending on these factors.
Basic systems cost less upfront but may need replacement sooner. Premium polyaspartic or polyurea systems cost more initially but typically last longer and perform better. When you calculate cost per year of service, the premium options often provide better value.
We provide detailed estimates that break down exactly what’s included—surface prep, materials, labor, and warranty coverage. No hidden fees or surprise charges. You’ll know exactly what you’re investing in before we start work.
Professional-grade coatings can be applied in winter conditions, but temperature and humidity control become critical factors. We use equipment to manage the environment during application and curing, ensuring optimal results regardless of outside weather.
The key is maintaining proper temperatures during the entire process—from surface preparation through final cure. This might mean heating your garage temporarily, but it’s necessary for achieving the chemical bond that makes coatings last.
Some coating types are more tolerant of cold weather application than others. We’ll recommend the best system for your timeline and conditions. If weather conditions aren’t suitable, we’ll be honest about waiting for better conditions rather than compromising the results.
Local Resources
Useful Links
Other Services we provide in Kensington
