You’re not just getting a prettier floor. You’re getting a surface that handles everything your Gales Ferry garage throws at it – from hot tire marks to oil spills to Connecticut’s freeze-thaw cycles.
Your new polyaspartic coating resists stains, chemicals, and impact damage that would destroy regular concrete. No more permanent tire marks when you park after a summer drive. No more oil stains that won’t come out.
The result? A garage floor that stays clean with basic sweeping and occasional mopping. One that actually protects your concrete investment instead of letting it deteriorate year after year.
We’re a veteran-owned business that’s been serving Connecticut homeowners who understand the difference between cheap fixes and real solutions. We’re not the guys who show up, slap on a thin coating, and disappear when it fails six months later.
We specialize in polyaspartic and polyurea systems because they actually work in Connecticut’s climate. While other companies are still pushing outdated garage epoxy that yellows and peels, we’re using advanced coatings that cure properly in cold weather and won’t fail when your garage gets hot in summer.
Every installation comes with our 15-year residential warranty because we stand behind work that’s engineered to last, not just look good on day one.
Real garage floor transformation starts with proper surface preparation – something many contractors skip to save time and money. We don’t cut corners because we know failed coatings always trace back to rushed prep work.
First, we evaluate your concrete’s condition and moisture levels. Then we diamond-grind the surface to create the mechanical bond that prevents peeling and delamination. Any cracks or damage get properly repaired before we apply our moisture-blocking primer.
The polyaspartic coating goes on next, followed by decorative flakes if you want them, then our UV-resistant topcoat. The entire process typically completes in one day, and you can walk on it within hours. Your car can return to the garage the next day.
Ready to get started?
Your garage floor painting project includes everything needed for a complete transformation. Professional surface preparation, crack repair, moisture-blocking primer, polyaspartic base coat, decorative flakes (if selected), and UV-resistant topcoat.
We handle the details that matter in Gales Ferry’s climate. Connecticut’s freeze-thaw cycles demand coatings that flex with concrete movement. Our polyaspartic systems stay flexible while maintaining their bond, unlike brittle garage epoxy that cracks when your slab shifts.
The finished surface resists hot tire pickup – a common problem when you park after driving on summer roads. It also handles road salt, oil, brake fluid, and other automotive chemicals without staining or degrading. These durable garage solutions are what separate professional floor coating work from DIY attempts.
Our polyaspartic garage floor coatings are engineered to last 15+ years in Connecticut’s climate, which is why we back them with a 15-year residential warranty. Traditional garage epoxy typically fails within 2-5 years due to UV damage, hot tire pickup, and freeze-thaw cycling.
The key difference is in the chemistry. Polyaspartic coatings penetrate deeper into concrete and maintain flexibility as your garage slab expands and contracts with temperature changes. They also resist UV yellowing that makes epoxy floors look dingy over time.
With basic maintenance – regular sweeping and occasional mopping – your floor will maintain its appearance and performance for decades, not years.
Yes, our polyaspartic coatings can be installed year-round in Connecticut, including winter conditions. Unlike garage epoxy that requires specific temperature and humidity ranges, polyaspartic systems cure properly even in cold weather.
This flexibility means you don’t have to wait for perfect spring weather to transform your garage floor. We can complete your project when it’s convenient for you, not when the weather cooperates.
The coating cures through chemical reaction rather than evaporation, so cold temperatures and humidity don’t prevent proper bonding. This is especially important in Gales Ferry where garage temperatures can vary significantly throughout the year.
Absolutely. Hot tire pickup is one of the most common problems with garage floors, especially during Connecticut summers when asphalt temperatures can exceed 150°F. Our polyaspartic topcoat has superior heat resistance compared to traditional garage epoxy systems.
When you drive on hot pavement and park immediately, regular concrete and epoxy coatings can soften enough for tire compounds to transfer permanently. Our coating maintains its integrity at these temperatures, preventing permanent marking.
This heat resistance also means the coating won’t yellow or degrade from UV exposure through garage windows or when doors are open. Your floor maintains its original color and gloss for years, not months.
Maintenance is remarkably simple compared to bare concrete or failed coatings. Regular sweeping removes dirt and debris, while occasional mopping with mild soap handles any spills or stains.
The seamless, non-porous surface means oil, coolant, and other automotive fluids wipe up easily instead of soaking into concrete. You can even use a garden hose for deeper cleaning if your garage has proper drainage.
Unlike waxed floors that require regular reapplication, or concrete sealers that need annual renewal, your polyaspartic coating maintains its protective properties without additional treatments. The 15-year warranty covers this performance, giving you confidence in long-term durability.
The difference is like comparing professional paint to house paint from a spray can. DIY garage epoxy kits use thin, single-coat systems that lack proper adhesion promoters and UV protection. They’re designed for low cost, not long-term performance.
Our polyaspartic systems use multiple specialized layers: moisture-blocking primer for adhesion, base coat for durability, optional decorative flakes, and UV-resistant topcoat. Each layer serves a specific purpose in creating a coating system that actually lasts.
Professional surface preparation is equally critical. We diamond-grind the concrete to create mechanical bond, repair cracks properly, and ensure moisture levels won’t cause future delamination. DIY kits skip these steps, which is why they typically fail within 1-2 years.
Yes, we serve all of Connecticut from our base in East Hartford. We regularly work throughout New London County, including Ledyard, Groton, New London, and surrounding communities with our Connecticut flooring services.
Our service area extends to Hartford, Fairfield, New Haven, and other Connecticut counties. As a veteran-owned business, we’re committed to serving homeowners throughout the state who want professional-grade garage floor solutions.
Distance isn’t typically an issue for garage floor projects since most installations complete in one day. We’ll provide accurate scheduling and coordinate with your availability regardless of your location within our Connecticut service area.
Local Resources
Useful Links
Other Services we provide in Gales Ferry
