Your garage becomes the cleanest room in your house. Oil spills wipe up with a paper towel. Water beads right off the surface.
The floor stays spotless even after Connecticut’s harsh winters track salt, snow, and mud through your space. No more concrete dust on your cars or storage items.
You can finally park both vehicles inside without worrying about stains or damage. Friends actually compliment your garage floor—something that’s never happened before.
We’ve been transforming Connecticut garage floors since 2020. We’re veteran-owned, BBB accredited, and we understand what Wallingford Center homeowners face.
Your concrete takes a beating from freeze-thaw cycles, road salt, and humidity. Many of the homes in your neighborhood were built between 1970-1999, which means garage floors that have seen decades of wear.
We’ve perfected our process specifically for Connecticut conditions. When other contractors tell you to wait for perfect weather, we’re installing floors year-round because our materials work in temperatures from -30°F to 140°F.
We start by diamond-grinding your concrete to create the proper profile for adhesion. No shortcuts with acid etching that leaves sealers behind.
Next comes crack repair using professional-grade materials, followed by a thorough commercial cleaning to remove every trace of dust and debris. Then we apply our moisture-blocking primer to prevent peeling.
The polyaspartic coating goes down in one thick, even layer. We broadcast decorative flakes if you want texture and visual appeal. Finally, a crystal-clear topcoat locks everything in place.
You can walk on it in hours, drive on it tomorrow. The entire process typically takes one day, and you get a floor that will outlast your house.
Ready to get started?
You get a coating system that’s 20 times stronger than traditional epoxy. It won’t yellow from UV exposure, won’t peel from hot tires, and won’t crack when your concrete shifts during Connecticut’s freeze-thaw cycles.
Wallingford Center sits right between New Haven and Hartford, which means you deal with urban pollutants, road salt, and heavy traffic patterns. Our polyaspartic coatings handle all of it without breaking down.
The median home value in your area is around $292,100, and homeowners here understand quality investments. This isn’t a temporary fix—it’s a permanent upgrade that adds value while solving real problems.
We’re locally owned and operated, so we understand your neighborhood’s specific challenges. From the older colonial homes near the center to the ranch-style houses built in the ’70s and ’80s, we’ve worked on every style of garage in Wallingford Center.
Traditional garage floor paint fails within 1-2 years in Connecticut because it can’t handle freeze-thaw cycles, road salt, and moisture. Paint sits on top of concrete and peels when the surface moves or gets wet.
Our polyaspartic coatings penetrate deep into the concrete and form a chemical bond. They’re designed for Connecticut’s harsh conditions and will last 15+ years without maintenance. We’ve had installations from 2020 that still look brand new despite multiple harsh winters.
The key difference is that paint is a surface treatment, while our coating becomes part of your concrete. When your concrete expands and contracts with temperature changes, our coating moves with it instead of cracking or peeling off.
Yes, and this is where we’re different from most contractors. Traditional epoxy requires specific temperature and humidity conditions, which limits installation to perfect weather days.
Our polyaspartic materials cure properly in temperatures from -30°F to 140°F. We’ve installed floors during snowstorms and summer heat waves with identical results. The coating actually cures faster in cold weather.
This means you don’t have to wait until spring or worry about scheduling around Connecticut’s unpredictable weather. When you’re ready for a new floor, we can typically get it done within a week regardless of the season.
The DIY kits are water-based epoxy paint that requires perfect conditions and minimal surface preparation. They work for about a year if you’re lucky, then start peeling where tires touch the floor.
We use commercial-grade polyaspartic coatings that require diamond grinding, professional surface prep, and specialized application equipment. Our materials cost more than your entire DIY kit, but they’re the same coatings used in car dealerships and manufacturing facilities.
The biggest difference is surface preparation. DIY kits tell you to acid-etch, which doesn’t remove the concrete sealer that prevents adhesion. We diamond-grind to create the proper profile, then use commercial cleaning equipment to ensure perfect adhesion. That’s why our floors last decades while DIY attempts fail within months.
Professional coating typically costs $3-7 per square foot depending on your specific needs and chosen finish options. A typical two-car garage runs $1,200-2,400 for a complete transformation.
Paint might cost $200-400 in materials, but you’ll repaint every 1-2 years and deal with constant maintenance. Over 10 years, you’ll spend more on paint and your time than our one-time professional installation.
More importantly, our coating adds real value to your home while paint is just maintenance. Wallingford Center home values average around $292,100, and a professional garage floor is a selling point that buyers notice. Paint is expected; a showroom-quality floor stands out.
Almost certainly yes. We’ve successfully coated concrete from the 1940s to brand new construction. Age isn’t the issue—condition is what matters.
We evaluate each floor individually and address specific problems during preparation. Cracks get filled with structural repair compounds. Oil stains are removed with specialized degreasers. Uneven areas are ground smooth.
The diamond grinding process actually improves old concrete by removing the weak surface layer and creating a strong profile for adhesion. Many of Wallingford Center’s homes were built in the ’70s and ’80s, and those garage floors often coat beautifully because the concrete has fully cured and stabilized.
Absolutely. Our polyaspartic coatings are low-VOC and low-odor during installation, and completely safe once cured. Unlike some industrial coatings, these are designed for residential environments.
The coating is non-toxic, non-slip when properly textured, and actually improves your garage’s air quality by sealing concrete dust. No more concrete powder on your cars or breathing concrete particles.
We recommend keeping pets and children away during the 4-6 hour installation process, mainly for their safety around our equipment. Once cured (usually within 24 hours), the surface is completely safe for normal family use, including kids playing and pets walking across it.
Local Resources
Useful Links
Other Services we provide in Wallingford Center
