No more oil stains soaking into concrete. No more dust tracking into your house. No more embarrassment when neighbors see your garage floor.
Your new polyaspartic coating creates a seamless, non-porous surface that makes spills disappear with a simple wipe. Hot tires won’t leave marks. Road salt won’t cause damage. Even after years of Connecticut winters, your floor looks like it was installed yesterday.
Most importantly, you get your garage back as functional space instead of just car storage.
We’re a veteran-owned business that understands Connecticut’s unique challenges. We’ve seen what road salt and freeze-thaw cycles do to concrete.
That’s why we specialize in polyaspartic coatings instead of basic epoxy. While other contractors in the Moodus area might offer cheaper solutions, we focus on what actually works long-term in our climate.
Our team is certified in advanced coating systems that most contractors don’t even know exist. When you’re investing in your home, you want it done right the first time.
We start by properly preparing your concrete surface. This isn’t optional – it’s why DIY kits fail and why some contractors cut corners. We diamond grind the surface to create the mechanical bond that makes coatings last decades.
Next comes our moisture mitigation primer. Connecticut basements and garages deal with humidity, so this step prevents future peeling that you see with standard epoxy jobs.
Then we apply the polyaspartic base coat and broadcast decorative flakes while it’s still wet. This creates texture for slip resistance and hides minor concrete imperfections.
Finally, the polyaspartic topcoat locks everything in place. You can walk on it in hours, park on it tomorrow. Most jobs in Moodus are completed in a single day.
Ready to get started?
Your garage floor coating needs to handle what Moodus throws at it. Winter road salt. Spring moisture. Summer heat that makes car tires sticky. Fall leaves and debris.
Polyaspartic coatings perform in temperatures from -30°F to 140°F. They’re 100% UV stable, so they won’t yellow like epoxy when sunlight hits them through your garage door. The chemical resistance means gasoline, oil, brake fluid, and even battery acid won’t cause permanent stains.
Most importantly for busy Moodus families, cleanup takes minutes instead of hours. Spills that would permanently stain concrete simply wipe away. No special cleaners needed – just water and basic soap.
The investment pays for itself through reduced maintenance, increased home value, and the simple satisfaction of having a garage that doesn’t embarrass you.
Our polyaspartic garage floor coatings are engineered to last 20+ years in Connecticut’s harsh climate. Unlike traditional epoxy that can fail within 3-5 years due to temperature cycling and moisture, polyaspartic technology flexes with your concrete as it expands and contracts.
The key difference is in the chemistry. Standard epoxy becomes brittle and cracks when your concrete moves with freeze-thaw cycles. Our polyaspartic system is 98% more flexible, so it moves with your floor instead of fighting against it.
We’ve seen our installations in the Moodus area perform flawlessly after multiple harsh winters. The UV stability means no yellowing or fading, even in garages with windows or frequently open doors.
Polyaspartic coatings outperform traditional epoxy in every category that matters for Connecticut homeowners. Cure time is the most obvious difference – you can park on polyaspartic in 24 hours versus 7-10 days for epoxy.
Durability is where the real difference shows. Polyaspartic is 4x stronger than epoxy and won’t yellow from UV exposure. It handles hot tire pickup better, which is crucial during summer months when your car sits in the sun before entering the garage.
Chemical resistance is also superior. While epoxy can be damaged by gasoline, oil, or even some cleaning products, polyaspartic shrugs off these exposures. For Moodus homeowners who work on cars or store lawn equipment, this chemical resistance prevents permanent floor damage.
Small cracks and minor concrete imperfections are actually perfect candidates for polyaspartic coating. Our preparation process includes crack filling and surface leveling to create a smooth base.
However, we’re honest about limitations. If your concrete has major structural issues, settlement problems, or active water infiltration, those need to be addressed first. A coating is only as good as the substrate underneath.
During our consultation, we’ll assess your concrete’s condition and recommend any necessary repairs. Most Moodus garage floors just need proper cleaning and minor crack repair before coating. The decorative flake system we use actually helps camouflage small imperfections while providing slip resistance.
Maintenance is surprisingly simple – that’s one of the biggest benefits of professional coating. Regular sweeping or leaf blowing removes debris. For deeper cleaning, just use a mop with warm water and mild soap.
Oil spills, tire marks, even road salt residue wipe away easily. You don’t need special cleaners or harsh chemicals. Many of our Moodus customers tell us they clean their garage floor more often now simply because it’s so easy and the results look great.
Avoid abrasive scrubbing pads or harsh chemicals like paint thinner. The coating is tough, but why risk it? With proper care, you’ll get decades of performance with minimal effort.
DIY epoxy kits from home improvement stores typically cost $200-400 for materials. Professional polyaspartic installation ranges from $3-8 per square foot depending on the system and preparation required.
Here’s what that price difference gets you: proper surface preparation (the most critical step), professional-grade materials that last 5-10 times longer, and warranty coverage. We see DIY failures regularly – usually within 2-3 years when the coating starts peeling or wearing through.
When you factor in the time investment, tool rental costs, and the likelihood of needing to redo a failed DIY job, professional installation often costs less over the long term. Plus, you get your weekend back and the confidence that comes with proper installation.
Most single-car garages in Moodus are completed in one day. Two-car garages typically take 1-2 days depending on the concrete condition and any necessary repairs.
The key advantage of polyaspartic coating is the fast cure time. While epoxy keeps your garage unusable for up to a week, you can walk on polyaspartic in 2-4 hours and park your car the next day.
Weather rarely affects our schedule since polyaspartic cures regardless of temperature or humidity. This is especially important for Connecticut homeowners who need reliable scheduling around work and family commitments. We’ll give you an exact timeline during our consultation based on your specific garage size and condition.
Local Resources
Useful Links
Other Services we provide in Moodus
