Your garage floor stops being an embarrassment and starts being something you’re actually proud to show people. No more oil stains that won’t come out. No more concrete dust settling on everything. No more worrying about spills or scratches.
Instead, you get a glossy, professional surface that wipes clean with just soap and water. Chemical spills from your car or projects? They sit on top instead of soaking in, so cleanup takes seconds instead of hours of scrubbing.
The floor actually reflects light now, making your garage brighter and easier to work in. And when friends or neighbors see it, they ask who did the work because it looks that good.
We’ve been protecting concrete surfaces across Connecticut for years, and we understand what Hazardville homeowners deal with. The freeze-thaw cycles that crack concrete. The road salt that eats away at floors. The humidity that can cause coating failures if you don’t prep right.
We’ve seen every type of concrete problem Connecticut throws at garage floors, from brand-new construction to 50-year-old slabs that have seen better days. That’s why we use professional-grade materials and proper surface preparation – because we know shortcuts don’t work in our climate.
When we say a floor will last 15-20 years, we mean it. We’ve been doing this long enough to see our early work still performing exactly as promised.
First, we prep your concrete properly – and this step matters more than anything else. We grind, clean, and repair any cracks or damage because epoxy only performs as well as what’s underneath it. Most coating failures happen because someone skipped this step.
Next, we apply our base coat using professional equipment, not rollers from the hardware store. The material goes down evenly and bonds permanently to your concrete. If you want decorative flakes, we broadcast them while the base is still wet so they become part of the system, not just sitting on top.
Finally, we seal everything with a clear topcoat that provides the chemical resistance and durability you’re paying for. The whole process takes about two days – day one for prep and base coat, day two for the topcoat. You can walk on it after 24 hours and park on it after 72 hours.
Ready to get started?
Every garage floor epoxy coating in Hazardville, CT includes complete surface preparation, crack repair, and professional-grade materials designed for Connecticut’s climate. We’re not just slapping coating over whatever’s there – we’re building a system that will perform for decades.
Your installation includes our high-performance base coat, decorative options if you want them, and a clear protective topcoat that resists chemicals, abrasion, and UV damage. We also handle all the prep work that most contractors try to skip – grinding, cleaning, and making sure your concrete is ready for a permanent bond.
Connecticut homeowners deal with road salt, freeze-thaw cycles, and humidity that can destroy inferior coatings. That’s why we use materials specifically chosen for our climate and install them according to manufacturer specifications, not shortcuts that save time but cost you money later.
Professionally installed epoxy garage floors in Hazardville typically last 15-20 years with proper maintenance. The key is proper surface preparation and using professional-grade materials designed for Connecticut’s climate.
DIY kits from big box stores usually fail within 5-10 years because they don’t include proper surface prep or professional-grade materials. When we install a floor, we grind the concrete to create the right surface profile, repair any cracks, and use industrial-strength coatings that bond permanently to your concrete.
Connecticut’s freeze-thaw cycles and road salt are hard on any coating, but professional installation with the right materials handles these conditions without problems. We’ve been installing floors long enough to see our early work still performing exactly as promised after 15+ years.
Polyaspartic coatings cure faster and offer better UV resistance than traditional epoxy, but epoxy provides excellent durability at a lower cost. Both work well in Hazardville garages when installed properly.
Epoxy takes 24-72 hours to fully cure, which means your garage is out of commission for a few days. Polyaspartic can be ready for traffic in just 4-6 hours, so you can use your garage the same day. Polyaspartic also won’t yellow over time like some epoxies can.
However, epoxy has been proven in thousands of installations and offers outstanding chemical resistance, impact resistance, and durability at a more affordable price point. For most Hazardville homeowners, properly installed epoxy provides everything they need. We’ll help you choose the right coating based on your specific situation and budget.
Proper surface preparation is the most critical step and involves grinding the concrete to create the right surface profile, repairing any cracks, and ensuring the surface is completely clean and dry.
We start by grinding your concrete floor to remove any existing coatings, paint, or surface contaminants. This also creates the rough surface profile that epoxy needs to bond permanently. Any cracks get filled and leveled so your finished floor is smooth and uniform.
Next, we thoroughly clean the surface to remove all dust and debris from grinding. The concrete has to be completely dry – any moisture will prevent proper bonding and cause coating failure later. This prep work takes time, but it’s what separates professional installations that last decades from DIY jobs that fail in a few years.
Yes, professional-grade epoxy coatings are specifically designed to handle road salt, freeze-thaw cycles, and other harsh conditions common in Connecticut winters.
Road salt and ice melt products are highly corrosive, but properly installed epoxy creates a chemical-resistant barrier that prevents these materials from reaching your concrete. The coating won’t be damaged by salt, and cleanup is as simple as hosing down the floor.
Freeze-thaw cycles can crack concrete, but they won’t affect a properly bonded epoxy coating. The coating flexes with minor concrete movement and provides a protective layer that prevents water from penetrating and causing freeze damage. We’ve seen our installations in Hazardville perform perfectly through many harsh Connecticut winters without any issues.
Professional garage floor epoxy coating in Hazardville typically costs $4-7 per square foot depending on the size of your garage, condition of the concrete, and decorative options you choose.
A standard two-car garage (around 400 square feet) usually runs $1,600-2,800 for complete professional installation including surface preparation, base coat, and protective topcoat. Larger garages cost less per square foot, while smaller spaces or floors that need extensive repair work cost more.
The investment pays for itself through increased property value, reduced maintenance costs, and the durability of professional installation. DIY kits might seem cheaper upfront, but they typically fail within 5-10 years and need replacement, while professional installation lasts 15-20 years with proper maintenance.
Epoxy garage floors require minimal maintenance – regular sweeping, prompt cleanup of spills, and occasional mopping with mild soap and water to maintain their appearance and performance.
Daily maintenance is simple: sweep or dust mop to remove dirt and debris that could scratch the surface over time. Clean up any spills promptly to prevent staining, though properly installed epoxy resists most chemicals and won’t stain permanently from normal garage spills.
For deeper cleaning, use warm water with a pH-neutral cleaner and avoid harsh chemicals or abrasive scrubbers that could damage the coating. Place mats at entryways to reduce tracked-in dirt, and use pads when moving heavy equipment to prevent gouges. With this basic care, your epoxy floor will maintain its like-new appearance for decades.
Local Resources
Useful Links
Other Services we provide in Hazardville
