You’re tired of looking at that cracked, stained concrete. The oil spots won’t come out. The surface is dusty no matter how much you sweep. And every time it rains, you’re dealing with moisture seeping through.
Epoxy flooring in Gales Ferry, CT changes that. The coating seals the concrete completely, so spills sit on top instead of soaking in. You can wipe up oil, antifreeze, or whatever else hits the floor without leaving a mark. No more scrubbing on your hands and knees.
The surface stays clean with a quick sweep and occasional mop. That’s it. No stripping, no waxing, no resealing every year. You get your weekends back, and your floor actually looks like you care about it.
It works in garages, basements, workshops, even commercial spaces where forklifts and heavy equipment move around all day. The coating is built to take impact, resist chemicals, and hold up under weight that would crack regular concrete.
We’re locally owned and operated right here in Connecticut. We’re not a franchise. We’re not subcontracting your job out to whoever’s available. It’s our team, our equipment, and our reputation on every floor we install.
Our owners bring over 30 years of business experience, and we’ve completed thousands of epoxy projects across residential, commercial, and industrial properties. We know what works in Gales Ferry’s climate, what holds up in Connecticut winters, and what fails when someone cuts corners.
You’re working with people who live here, who understand the local conditions, and who’ll be around if you ever need anything down the road. We’re BBB accredited, and we back every installation with a warranty on both materials and workmanship.
First, we prep the concrete. That means grinding down the surface to remove any old coatings, sealers, or contaminants. If there are cracks or damage, we repair those before anything else goes down. The concrete has to be clean and structurally sound, or the epoxy won’t bond properly.
Next, we apply the base coat. This is the epoxy resin layer that seals the concrete and creates the foundation for everything else. Depending on what you need, we can add color flakes, metallic finishes, or keep it solid. This is also where we mix in any slip-resistant additives if the floor will get wet.
Then comes the topcoat. This is the protective layer that gives you the chemical resistance, the durability, and the high-gloss finish. It’s what makes the floor easy to clean and able to handle impacts without chipping.
Most jobs finish in a single day. You’ll need to stay off the floor for about 24 hours while it cures, and it reaches full hardness within a week. After that, it’s ready for vehicles, equipment, foot traffic, whatever you need it for.
Ready to get started?
You get a floor system engineered for your specific use. If it’s a residential garage in Gales Ferry, CT, we’re setting it up to handle vehicle traffic, resist road salt and chemicals, and stay looking clean without constant upkeep. If it’s a commercial warehouse, we’re building in the impact resistance and load-bearing capacity you need for forklifts and heavy equipment.
The coating is seamless, which means no grout lines or seams where dirt and moisture can hide. It’s non-porous, so liquids don’t soak in. And it’s chemical-resistant, so cleaners, solvents, oils, and automotive fluids won’t damage the surface.
Connecticut winters are tough on floors. You’re tracking in road salt, sand, and moisture from November through March. Epoxy flooring handles that without breaking down. The coating won’t peel, crack, or discolor from freeze-thaw cycles the way cheaper sealers do.
You also get options. We’re not locked into one color or finish. You can go with a solid color, add decorative flakes, choose a metallic look, or keep it simple. If you need slip resistance for a pool deck or commercial kitchen, we add that into the topcoat. Every project includes a warranty, so you’re covered if anything goes wrong.
A professionally installed epoxy floor coating typically lasts 10 to 20 years in a residential garage, depending on how much traffic it sees and how well you maintain it. If you’re parking two cars and using the space for storage, you’re looking at the higher end of that range.
The coating is designed to resist the stuff that destroys regular concrete: oil, antifreeze, road salt, and moisture. It won’t stain, pit, or crack under normal use. You might see some wear in high-traffic areas after a decade, but it won’t fail or need replacement.
Commercial and industrial floors handle heavier loads and see more abuse, so the lifespan depends on the environment. A warehouse floor with constant forklift traffic might need a fresh topcoat every 7 to 10 years, but the base system stays intact. We use commercial-grade epoxy resin for those applications, which is thicker and more impact-resistant than residential coatings.
Yes, as long as the concrete is in decent shape. We can apply epoxy over existing concrete, but the surface has to be structurally sound. If there are major cracks, spalling, or moisture issues, we need to fix those first.
We start by grinding the concrete to remove any old sealers, coatings, or contaminants. That also opens up the pores in the concrete so the epoxy can bond properly. If there are cracks, we fill and repair them. If the slab has moisture problems, we address that before any coating goes down.
Older homes in Gales Ferry sometimes have concrete slabs that weren’t sealed properly or have settled over time. That’s fine. We can work with it. But if the concrete is actively crumbling or has severe structural damage, epoxy won’t fix that. You’d need to repair or replace the slab first, then we can coat it.
Epoxy is a two-part coating that chemically bonds to the concrete. Paint just sits on top. That’s the main difference, and it’s why epoxy lasts years while paint starts peeling within months.
Garage floor paint is cheap and easy to apply, but it doesn’t hold up. It scratches easily, stains from oil and chemicals, and peels when tires pull it up. You’ll be repainting every year or two if you go that route.
Epoxy flooring creates a thick, durable surface that resists impacts, chemicals, and abrasions. It’s not going to peel from hot tires or chip when you drop tools. The coating is also non-porous, so spills don’t soak in and stain the concrete underneath. You’re paying more upfront, but you’re not redoing the floor every couple of years.
Sweep or dust mop regularly to keep dirt and debris from scratching the surface. That’s the main thing. Epoxy is durable, but dragging around sand and gravel will eventually dull the finish.
For deeper cleaning, use a mop with warm water and a mild cleaner. You don’t need anything harsh. Avoid acidic cleaners or anything with citrus, as those can break down the topcoat over time. A simple degreaser works fine for oil or grease spots.
If you spill something, wipe it up when you can. The coating is chemical-resistant, so it’s not going to stain, but it’s easier to clean fresh spills than dried ones. You don’t need to wax, seal, or recoat the floor unless you’re in a high-traffic commercial environment. For most residential garages in Gales Ferry, CT, regular sweeping and occasional mopping is all it takes.
It depends on how bad the moisture problem is. Epoxy can handle normal basement humidity, but if you have active water seepage or a high water table pushing moisture through the slab, the coating won’t bond properly.
We test the concrete for moisture before any installation. If the slab is too wet, we’ll tell you. You’d need to fix the drainage or waterproofing issue first, then we can coat the floor. Epoxy isn’t a waterproofing solution. It’s a coating that seals the surface, but it won’t stop water from coming up through the concrete.
If your basement stays dry most of the time but gets a little damp in spring or after heavy rain, epoxy flooring works fine. The coating is moisture-resistant once it’s cured, and it won’t support mold or mildew growth like carpet or vinyl. Just make sure the underlying moisture issue isn’t severe, or you’ll have adhesion problems down the road.
Most residential garage floor coatings in Gales Ferry run between $3 and $7 per square foot, depending on the system you choose and the condition of the concrete. A standard two-car garage is around 400 to 600 square feet, so you’re looking at $1,200 to $4,200 for a complete installation.
That includes surface prep, crack repair, the epoxy base coat, color flakes or finish options, and a protective topcoat. If your concrete needs extensive repairs or you want a high-end metallic finish, the price goes up. If the slab is in great shape and you’re keeping it simple, you’ll be on the lower end.
Commercial and industrial projects are priced differently because the coatings are thicker, the prep work is more involved, and the square footage is larger. We give you a detailed proposal after looking at the space, so you know exactly what you’re paying for. No surprises, no upselling once we start. You’ll get a fair price based on what the job actually requires.
Local Resources
Useful Links
Other Services we provide in Gales Ferry
