You’re tired of watching your garage floor crack and stain while your neighbors pretend not to notice. Road salt eats concrete. Freeze-thaw cycles create new cracks every winter. Oil stains that won’t come out no matter what you try.
Our polyaspartic floor coating stops all of that. It creates a barrier that laughs at road salt, shrugs off oil spills, and stays flexible through Connecticut’s temperature swings. No more seasonal damage. No more permanent stains.
Your garage becomes a space you’re proud to show off instead of one you hope people don’t see. The transformation happens in one day, but the results last decades.
We know exactly what Blue Hills garage floors face. We’ve worked on dozens of those well-maintained 1950s ranch homes and Colonial Revivals. We understand what road salt does to concrete and why those hairline cracks turn into major problems.
We use industrial-grade polyaspartic coatings originally developed to protect steel from corrosion. If it handles that environment, your garage traffic isn’t even a warm-up. This isn’t paint or a cosmetic fix. It’s serious protection for serious homeowners.
Blue Hills residents take pride in their properties. We respect that by doing the job right the first time, with materials and methods that match your standards.
We diamond-grind your concrete to create the surface profile our coating needs for permanent bonding. No acid etching shortcuts that lead to peeling floors in two years. Every crack gets properly repaired, not just filled over.
Complete cleaning removes decades of oil, dust, and contaminants. Your coating bonds to clean concrete, not whatever was sitting on top of it. This preparation phase determines whether your floor lasts two years or twenty.
The polyaspartic coating goes down in controlled layers. Fast curing means efficient installation, but we never rush the details. Proper coverage, consistent thickness, and attention to edges and corners.
You park on bare concrete in the morning and drive back onto a transformed floor that evening. Most Blue Hills installations are completed in one working day.
Ready to get started?
Your installation includes complete surface preparation, professional crack repair, and industrial-grade polyaspartic application. We use the same coatings specified for commercial facilities because your garage deserves that level of performance.
Blue Hills’ southern-facing garages get serious UV exposure. Our polyaspartic coatings won’t yellow or fade even with direct sunlight streaming through windows. They’re formulated for temperature extremes without becoming brittle or losing adhesion.
The finished surface handles everything Connecticut throws at it: road salt, oil spills, antifreeze, and constant thermal cycling. Maintenance means occasional sweeping and mopping with household cleaners. That’s it.
You get a comprehensive warranty covering materials and workmanship. This is a permanent improvement to your property, not a temporary cosmetic fix.
Most Blue Hills garage floor coating installations are completed in one working day. We start in the morning with surface preparation – diamond grinding and crack repair. The polyaspartic coating application happens in the afternoon, and you can walk on your floor by evening.
You can park your car back in the garage within 24 hours. This fast turnaround is possible because polyaspartic coatings cure much faster than traditional epoxy systems. Weather conditions occasionally extend the timeline, but single-day completion is our standard.
The speed comes from using professional-grade materials and proper planning. DIY kits and budget installers often need multiple days because they use slower-curing products that require extended drying time between coats.
Our polyaspartic coatings are specifically engineered to resist road salt and deicing chemicals used throughout Connecticut winters. The coating creates a non-porous barrier that prevents salt from penetrating your concrete and causing freeze-thaw damage.
Road salt accelerates concrete destruction by creating freeze-thaw cycles in contaminated water. When salt water freezes, it expands and creates cracks that grow larger each winter. Our coating stops this process by preventing moisture penetration entirely.
Blue Hills homeowners report no salt damage even after multiple harsh winters with our coatings. The surface rinses clean with a garden hose, and there’s no staining or deterioration from deicing chemicals. This protection extends your concrete’s life significantly.
Polyaspartic coating outperforms traditional epoxy in areas that matter for Blue Hills homeowners. It cures much faster, allowing same-day installation and use. Epoxy typically requires several days to fully cure, which isn’t practical for busy families.
UV resistance is crucial for Connecticut garages. Polyaspartic won’t yellow or fade with sunlight exposure, while epoxy often discolors over time. This matters if your garage has windows or gets southern exposure throughout the day.
Durability is superior because polyaspartic stays flexible as temperatures change. This prevents the cracking that rigid epoxy systems experience during Connecticut’s temperature extremes. Flexibility prevents coating failure that leads to expensive repairs or complete replacement.
Professional preparation determines whether your coating lasts two years or twenty. We diamond-grind to create the proper surface profile for coating adhesion. This mechanical preparation is superior to acid etching because it creates stronger bonding.
All cracks and surface defects get properly repaired using commercial-grade materials. We don’t just fill cracks – we address underlying causes to prevent them from returning. Any existing coatings or sealers must be completely removed since new coating won’t bond over old materials.
The concrete must be thoroughly cleaned and completely dry before coating application. We use commercial equipment to remove all dust, oil, and contaminants. Moisture testing ensures the concrete is ready. Rushing preparation is the main reason coating projects fail prematurely.
Professional polyaspartic garage floor coating in Blue Hills typically ranges from $5 to $12 per square foot, depending on garage size, current floor condition, and specific coating system. Larger garages often have lower per-square-foot costs due to economies of scale.
Surface condition significantly impacts pricing. Floors with extensive cracking, old coatings requiring removal, or moisture issues need additional preparation work. However, proper preparation is essential for long-term performance, so cutting corners leads to premature failure.
The investment pays for itself through eliminated maintenance and extended concrete life. Blue Hills homeowners report their coated floors still look new after 10+ years, while unprotected concrete typically needs expensive repairs much sooner. Factor in increased property value and reduced maintenance when evaluating the investment.
Absolutely. Many Blue Hills homes built in the 1950s have concrete garage floors that are excellent candidates for coating. Older concrete often has superior density compared to modern pours, which provides better coating adhesion once properly prepared.
Age-related issues like minor cracking or surface wear are easily addressed during preparation. We repair cracks, level uneven areas, and create the ideal surface profile for coating bonding. The result often looks better than new construction because we correct decades of accumulated imperfections.
Older homes benefit most from coating protection. After 70+ years of exposure, concrete needs protection from further deterioration. Our coating systems stop moisture penetration and chemical damage, essentially freezing the aging process and extending your floor’s life indefinitely.
Local Resources
Useful Links
Other Services we provide in Blue Hills
